When it comes to mowing your lawn, you need to take into account several different tips and tricks to ensure that you are able to get a proper lawn. Mowing a lawn, and maintaining the green and more takes a great deal of time overall. You are not going to get forward progress if you don’t know what you’re doing, or if you just start a mower and get to work. While a mower is a great tool to keep your lawn great, you need to take into account a few notes that will help you get the right option. Take into consideration the following tips and tricks that are going to help you get a great upward mobility with the look and feel of your lawn today. These options will pay off dividends, guaranteed.
Don’t Go Too Short
It happens all the time. You buy a good lawn mower, and then you cut your lawn but it’s too low. This is an issue known as scalping. Do not scalp your lawn at all. If you let the blades hit too low on the grassy areas, then you’re going to end up dealing with a variety of issues down the line. This weakens the grassy areas, and can cause soil exposure, and could very well break down your lawn and cause serious problems. A lawn can have too much sunlight, and if you cut your grass too much, you can actually cause brown spots to permeate.
Sharpen Your Mower Blades A Bit
There are several types of blade options that come with owning a mower. No matter what type you invest in, it’s imperative that you ensure that you sharpen your blades. You don’t need to do this all the time, but every few months, look to see the blades. Look for individual spots, rust, and even whitened parts of the metal. If you see white or brown hues come through, then your blade may not be sharpened. You may need to get a professional edge on this, as some mowers require professional sharpening of the blades overall. There are some mowers that can let you upgrade and change the blades out if you need to do that. Now, with that in mind, sharpen your mower blades, and keep them in place. Sharp blades will give you more control over your lawn, and that’s the most important part here.
Adjust The Height of Your Mower
There are several different adjustments that you can make with your mower. To ensure that your mower is the best, make absolutely sure that you work with different mowers overall. TO ensure that you are able to progress with a lovely lawn, make sure that you adjust the height of the blades, and focus on higher levels during the summer months. Then switch to lower solutions during the fall and winter. During the summer, make sure that you let the grass grow a little, and allow some shade to come through on the soil. That will ensure that you will end up with a positive push forward with ease.
Look Out For Shade
One of the great things that you need to watch out for is the notion of shade. Look at any areas that you have that are shady, and if you see shade comes through during the day, move your mower’s height a bit. Adjusting the height is already a good tip, but this should be done in a different manner if you have pieces of your lawn that get a lot of shade. The more shade that comes through in certain areas, the more productive the blades can be. With that in mind, make sure that you adjust the blades to be a little higher. This is going to help you get higher cut points, and that will let the shade help with evenly distributing growing processes.
Wait For Dryer Grass Points
Do not mow your grass when it is wet. You don’t want to do this because you can end up clogging your mower’s blades, and end ups ith patches that aren’t cut directly. Water can also weigh down blades, and cause a serious amount of issue. Always try to wait for dry grass to clean and cut through directly. Dry grass cuts easier, and will help you ensure that you are able to get forward progress without too many issues associated with clogs, or break downs of your mower. Mowers can obviously cut through wet grass, they are powerful enough, but clumping grassy areas can cause problems, and it’s not grand. Instead, you should look into dry grass cutting, as that is going to help you garner a great solution and finished lawn over time.
Don’t Bag All of Your Clipping
As you look at mowing lawns, make sure that you take into consideration how you collect and utilize grass. The big thing here is that you should let your clippings, at least a quarter of them stay on the grass. This is a recycling measure known as grasscycling. It allows you to get smaller cuts, allow your blades to fertilize after the fact, and gives you a better overall lawn over time. There is a balancing act here, and something that is going to help you get a better looking grass down the line. This doesn't’ mean that you should not bag any clippings, but you shouldn’t pack them all up.
Change Up The Directions
Lastly, when you’re working with lawn mowing, make sure that you do not mow things the same direction overall. Don’t mow your lawn in one direction every single time. You need to focus on changing up the pattern every time you mow. This is going to help you with getting a clearer, more defined lawn, and will look great down the line. This will also help you avoid weeds, and will let healthy grass come through and look great. Different directions will help grass grow properly, and will give you a good look and feel. It’s simply a great option.